Monday, September 15, 2008

September Mystery Tatting Revealed

Here are the 3 edgings listed last week as well as the 4th one that I didn't have time to test tat beforehand. I've put the original photo on top and my tatted version below. I told someone recently that my goal next year is to get a software program and learn to make diagrams. In the meantime, hope you find something fun to make these for!

September Mystery Tatting
Original by Sudie Sherrod, Needlecraft March 1925
Updated by Regina A. Brummett

Clr = close ring
Rw = reverse work
+ = join


#1
RA = ring A
RB = ring B

RA: 4 (- 4) 3 x, clr, rw
Ch 5, rw
RB: 4 + last p RA, 4 (- 4) 2 x, clr, SLT (shoelace trick)
*Ch 6 – 5, rw
R 9 - 3 – 6, clr
[R 6 + last p of prev r, (3 - ) 2 x, 6 clr] 4 x
R 6 + last p prev r, 3 – 9, clr, rw
Ch 5 + p prev ch, 6, SLT
R 4 + last p of RB, 4 ( - 4) 2 x, clr, rw
[Ch 5, rw, RB rw] 4 x, SLT after last RB instead of rw
Repeat from * length desired


#2
*R 10 – 10, clr, rw
Ch (1 - ) 7 x, 1, + p prev r, 1, ( - 1) 7 x, + at base of prev r**
Ch 10, rw
Repeat * to ** (now referred to as double ring or DR)
Ch 10
DR, which means to make the 10-10 ring and then + 1st or corresponding DR at 4th p of outer chain or [ ch 1-1-1-1 + 4th p of corresponding outer ch, 1-1-1-1, + p of r, (1-) 7 x, 1, + at base of r)
DRs will zigzag in opposite directions and join to DR before last one made
Continue for desired length
~tip: chains are all facing in same direction


#3
Cloverleaf begins
*RA (ring A) 9 – 3 – 6, clr
RB (ring B) 6 + prev r, (3 - ) twice, 6, clr
RC (ring C) 6 + prev r, 3 – 9, clr , rw
Ch (4 - ) 4 x, 4, rw
RA and + to last p of prev cloverleaf with 1st p
(RB joining to last p of prev r) 3 x
RC, rw
Ch (4 - ) 4 x, 4, rw
Repeat for desired length


#4
2 shuttles wound CTM
If you use 2 shuttles with different colors, you will have to SS (switch shuttles) or SLT to get the colors where you want them differently from the directions.

Cloverleaf
R (3-) 3 x, 3 clr
R 3 + last p prev r, 3-1-1-3-3, clr
R3 + last p prev r, 3-3-3, clr, do not rw, SS (switch shuttles
Ch 7-1-1-1-7, SS
R 1- (2-) 8 x, 1, clr, rw
*Ch 1 (-1) 5 x, miss 1 p of r and lj (lock join with shuttle thread) in next free p
Repeat * 4 x, joining 2nd 5p segment at 3rd p to middle p of last r of cloverleaf and join last 5 p segment to base of r.
Ch 7-1-1-1-7, rw
Repeat from beginning, joining 1st r of cloverleaf at middle p to middle 5p segment of 4th segment.
Continue for length.

3 comments:

  1. These are all so pretty! I love edgings!

    ReplyDelete
  2. These are beautiful Gina. I'll have to save them to my "to do file". Thank you so much for the time you put into this!

    ReplyDelete
  3. I love that you pull out all these forgotten patterns. When you see them in black and white they don't have the same pizzaz.

    ReplyDelete

Emails and comments both are welcome and always read.